Parts Identification

• Familiarize yourself with the parts of your ES1500 Micro Torch before operating it.
  
• It should be handled by literate adults, or under constant adult supervision.
  
• It is essential that the following operating procedures be read and understood before attempting to light or use the Blue Flame ES1500 Micro Torch.
  
• These procedures must be carefully observed in order to promote safe usage.

Igniting and Shutting-Off your Blue Flame ES1500 Micro Torch

• Push the ignition lever downward and the gas will be ignited electronically with a snapping sound.
  
• Lock the flame with the flame lock knob.
  
• For shut-off, release the flame lock knob.

Thermal Power and Flame Control of your Blue Flame ES1500 Micro Torch

• Adjust the thermal power level and the lenght of the flame to suit usage objectives.
  
• The highest temperature attainable will be about 1,300 degrees Celsius.
  
• Both the gas control knob and the air control knob can be used to regulate the flame.
  
• After ignition, turn the air control knob either to the right or left for necessary thermal power adjustments. Closing the air inlet well produce a low temperature yellow flame, while fully opened the micro torch produces a sharp, high temperature blue flame.
  
• After ignition, do not leave the ES1500 Micro Torch burning longer than 30 minutes continously.

Refilling your Blue Flame ES1500 Micro Torch

• For detailed instruction, refer to our Refilling Section.

Safety and Handling Precautions regarding the Blue Flame ES1500 Micro Torch

• For a detailed overview of safety, storage and handling instructions, please refer to our Safety & Storage Section.